I don't know how many times I would go to that (perverable) bucket searching for the perfect worship flag.

I knew that there had to be a better way to display flags for worship in church, so I pulled a few items together and came up with these small stands for small and medium flags and larger stands to hold 48" poles to 10' poles.  

The stands that I developed are not anything complex or hard to build.

All the products  that you will need can be found at your local hardware store. Lowes home building store is where I purchase all my supplies: wooden base, pvc pipe, wood screws, milking stool, spray paints and other misc. supplies. 

 If you would like a more detailed supplies list, just emailed me and request one. Thanks, Charlotte

supply list for small stand:

1 milking stool which can be purchase at Lowe's

Buy all 1 1/4 inch items.

Galvanized floor flange, plastic adapter, pvc plastic pipe( cut down in sections),

slip coupling

I measure my placments and screw all floor flanges on top of the milking stool.

I can get anywhere from 6 to 7 on the stool. There should be about 4 screw in each floor flange to screw onto base, this should keep it secure.

After attaching the floor flange to the base stool I then screw in the adapter. The adapter should have threading to screw into the flange.  After that you need to just fix your pvc pipe into the adapter and glue it with a gorilla glue. To finish it off I would recommend for you to purchase a slip coupling. Place the coupling over the pvc for added appearance. That should do it.  Let me know if you have any trouble with putting these items together.  I would be glad to help you in any way. 

Thanks Charlotte